hi guys after using the search I could'nt find the right solution for my problem. I had a prob with my Ignition switch due to worn rod gear. took out the column from my 69 electra fixed the gear, disasembled the ign switch, cleaned and greased it new and did the adjustment. lock zylinder fitted and it worked fine.column back in car .... turn to start....no reaction! in "acc" no power...in "run" the gen light is on but very slight....turn to start the gen light goes very bright and also the "stop engine" and "hot" lamp goes on. That's it....no reaction! I checked all connections several time...connection to ign switch and neutral switch. signal switch/light is working. hope you understand my english....a german living in new zealand. Thanks for help.
Check whatever you are using to supply "ground" or negative- - it sounds like you're not passing much current.:TU: Robert1