wtb 70 GS 350 painted wheels, breather hose, more

for 1970 GS 350 i need 1-2 grey steel 14x6 (?) painted rally wheels with stainless trim rings.

i need the slide mechanism for the front ( dash ) ash tray, and all the mounting screws and rubber bumper that go with if possible. i can use some of the black painted screws that go in the dash board.

i need the molded rubber hose from the drivers side of the breather to the valve cover. just an ok used one is fine.



i need a nos or mint used green carpet set for 70 GS, i think 70-72 is all the same. dark green mint used would be prefered, or nos. i see repro green carpet on ebay, i would actually prefer mint used. most ( any that can be installed w/o holes, tears. ) bench seat, col shift only. trim code 170

i need green 16" drivers side arm rest, green sun visors, green mesh package tray. green 1970 bench seats w/ fold down armrest, green steering wheel w/ 4x9 "buick" hornpad, nos / repro dome lenses white w/ rings. nos/ repro washer reservoir ( bracket type )

transmission fluid dip stick # 1387568 transmission dip sticks for 350 and 400 trans from 1968- 1973 ( exc 68 350 ) i want 1 or 2.

nice 7040244 Q-jet carb.

all items must be in nice condition, ready for service. will travel for some of this. what do you have in the way of 69-72 green interior parts ?


thank you :3gears:

 

What shape are your seat belts in.
I have a green set, very good condition. The retractors there also.
These are from a '72 I think. Bought them for the deluxe buckle covers. They currently have black covers on them with exception of the smaller buckles, driver & pass. lap belts , I think.These are still the chrome/silver deluxe style.
My interior is Sandalwood.

 

Ash tray slide

Is this the one you need? I got it with a bunch of Buick stuff, no part #.

 

I might have a Nos dome light w/bezel for you but I would need to know what yours looked like first.

 

I know I have some wheels for you too. I got them off a car from Arizona. Are you in a big hurry? I don't much time on my hands before vacation so if you can wait that would be better.

 

Henry,
I bought the repro carpet for my green interior, it was a perfect color match.

I have green carpeted kick panels, and some other green parts, I'll look and advise

 

I "think" I have the carb. Will look thru my carb inventory and verify on Fri night.

 

Steve, i am ok on seat belts, thank you.

cadlights, i think that slide is different, thank you.

Jarrod, if those wheels are in real nice condition and have the trim rings, i am interested. no hurry on the wheels. the dome lenses are the ones on the sail panels, they are white lens with circles on the lens face. all i actually need are the lenses. i kinda think CARS might repro those.

Mark, if you have a leftover front and rear green carpet that you want to sell, let me know.

George, i am interested in a decent rebuildable core 7040244 something i can send to John Osbourne's carb shop. not too concerned with date code.

Adam, i didnt know about that about CARS. thanks, thats good to know.

 

Went thru my inventory, no small block carbs.
Going to the local yards today, I will see what I can find.

 

i did find a carb, thanks. still need green interior parts and all the other items.

i think i need a Carter fuel pump Carter part # M 4642 ( or a GM pump )

the factory pump hose fittings come straight out the bottom of the pump. what the parts stores are selling these days has one hose fitting turning 90* causing it to be in the way of the metal line.

did not expect a fuel pump to be hard to find, but after three stores, ordered one from Pep Boys, have to wait to see if it has the right style fittings. i am not confident that what they have is what i need.

lemme know if anyone has any of this stuff. thanks, henry