I'm gonna be running 430 rockers on my new 455 combo. I thought I'd check and see if anybody had any before putting order in with TA after the new year. Chris
Are you looking for stock length, custom length, or adjustable? I bought my last two sets of custom length hybrid pushrods from Smith Bros Pushrods and they had them shipped in less than 48 hours.
I was just run adjustable.If custom made ones are close in price I can just go that route instead less hassle
I got a set of adjustable pushrods from a 455. Almost new. Just break in time on them then we got correct length ones. Not sure if those would work for you if interested. John jr
I believe I have a full set of the hybrid pushrods. Got em about a yr ago. Have to check and see if I used em or still on the shelf.
I should have clarified, the last two sets of custom length hybrid pushrods from Smith Brothers Pushrods were also adjustable length. I ordered a couple of extras just to have as spares since they are custom made. I took measurements of what I needed and gave it to them. They then sent me a pushrod that had some adjustability to make them longer or shorter. Pay no attention to the length of these because they were for a hydraulic roller lifter, but the rest of the description would be the same for someone doing pushrod oiling but using '67-'69 rocker arms.
Briz check it out and let know Buquick Thats a good price for 18. TA is at $220 plus there outrageous shipping.I would probably go with Smith Bros if nobody has any they wanna sell. John I have 455 ajustable's that I was running with 70 rockers.Thanks anyway though.
Not sure of lenght yet motor is not together.I've been gathering parts over the last year. Block is getting decked so pistons are .005 in the hole and heads are also getting milled. I thought about just buying ball end but according to TA the tube is a diffrent length, how much I dont know because I dont have measurement of hybrid tube.