WTS Buick 350 Performance Build. lots of parts need to sell! Looking to sell my 350 build I put alot of time and money into the build but now i really need the money. Detail of the build can be found here http://www.v8buick.com/showthread.php?269689-My-350-Build&highlight=. Basically i did everything most of the experts here on the forum said i should do and followed their directions on everything. Its a 1970 4bbl that has been bored .040 and brought to 10.5:1 comp with flat top pistons and was being built around the TA_290_94H-350 cam. Heads were home ported just to smooth everything out and then sent to a machine shop to get set up with Ta large ss valves and springs. All parts are from TA and bought brand new except for the intake. Intake has been polished and cleaned up by a machine shop. Im asking for $1100 for everything i have for the build. The heads have over $1000 just in parts and machine work not counting the hours spent porting them. Short block is assembled and not much is needed to get it going. please email for interest as i do not get on the forum very often brianbruns1991@gmail.com.
Interested in the TA intake and possibly the heads. Have the heads been milled at all? If you have TA valve covers I would be interested in those as well.