1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

"Y" Pipe '55 Roadmaster

Discussion in 'Classic Buicks' started by bhambulldog, May 16, 2011.

  1. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    Anyone, have an idea where, I can get a "Y" pipe for the exaust for my Roadmaster (1955 76-R 322 cid)? (I also posted in parts wanted)
     
  2. 66electrafied

    66electrafied Just tossing in my nickel's worth

    Try Waldrons online, they had an exhaust system for my 46; they might have a single system for yours...
     
  3. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    Thanks for the quick reply Marc. I just found their site. And, I came back here to ask; If, anyone had used them.
    Thanks again!
    You gotta love; V8BUICK!
     
  4. SpecialWagon65

    SpecialWagon65 Ted Nagel

    I've used them for my Wildcats, excellent people :beer
     
  5. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    Walden's has listed a complete set up; "y" pipe to muffler to tail pipe for $370. It seems a fair price. But, all I need is the "y" pipe. I've sent an email inquiring; if, I could buy the "y' a la carte........ I'll follow up with a phone call tomorrow.
     
  6. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    Thanks for the response. :)
     
  7. 66electrafied

    66electrafied Just tossing in my nickel's worth

    The system I bought from them for my 46 fit like it was supposed to, even was able to use the original hangers, no bending, no cutting, it bolted up like it was made at Buick.
     
  8. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    I'm leaning toward buying the whole system. And using the new "y" pipe; now. And, keeping the rest for later. $370 is a not a bad price.
     
  9. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    That's good news. I'm thankful you put me on their track.
     
  10. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    Ordered the complete system. awaiting; delivery..............
     
  11. airforce guy

    airforce guy Well-Known Member

    When you get plz let me know. I think I still have the original everything on my 55 super
     
  12. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    That's pretty good, 56 years, huh? And, my "Y" pipe is the Original!! On mine; very thing behind the "Y" has been replaced twice. And, the right manifold has been replaced once (that was a hard one to find!).
    I'm expecting it to arrive this week. I'll give Waldron's a call tomorrow morning...............,
     
  13. airforce guy

    airforce guy Well-Known Member

    My mistake a lot of it is original. I still have the rubber tubing for wiper attempt under the dash
     
  14. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    They say; It'll be here Friday!!!:)

    Those wipers are a real challenge!!:( I've got a rebuilt motor. All new vacuum hoses. Still, they don't work right. I'm thinking, about adding; a vacuum reservoir (?):Do No:
     
  15. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    HOORAY!!:grin:

    Exhaust system arrived today, from; Waldron's
    $370 for "Y" pipe, head pipe, muffler, tailpipe. Aluminized steel.
    $42 For; 2 hangers, 4 clamps, 2 gaskests.
    $100 Shipping,
    ______
    $512 total parts

    New project, for Monday.:)
     
  16. airforce guy

    airforce guy Well-Known Member

    Does that required welding
     
  17. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    Sorry, I haven't answered. We had a storm that knocked out the phone and internet. It's still out. I'm at the library, now, for; the internet. AT&T are at my house trying to figure out what is going on. They spent 5 hours there yesterday (sunday); no joy.........

    I took the Roadmaster to my most trusted shop in town.
    Edgewood Auto Service
    Mr. Pettus
    Homewood, Alabama 35209
    205-871-0547
    Good, honest, dependable!!!
    Anything, that requires going under the car; I leave to him. He has'nt started on it, yet. He said first thing in the morning. I 'll update when I know more. ...........
     
    Last edited: Jun 23, 2011
  18. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    It may indeed require welding. At the very least bending to make it fit. I am going to take it to a local muffler shop reccomended. First, thing; tomorrow.
     

    Attached Files:

  19. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    A copy of my email I sent to Waldron;
    Dear Waldon,
    I am sending this to inform you of a problem with the exhaust system purchased by, my father;
    Joseph A. Miller, Jr.
    XXXXXXXXXXXXXXXXXXXX
    XXXXXXXXXXXXXXXXXXXX

    We are in receipt of the exaust system for the '55 Buick Roadmaster. All parts were including as expected and as appeared on the packing list.
    So, good. So, far.
    It was our understanding that this would be bolt up system.
    However: Today, our mechanic informs us that; the peices will not fit without bending. Now, our car requires transport to a muffler shop that; can facilitate the bending neccesary to make the system fit. The "Y" fits up nocely to the manifolds and around the oil filter. The short piece behind the "Y" is getting interference from the frame rail. The muffler and tail pipe lack meeting up by 2 inches. (please, see; attached photos)
    Waldron's came highly reccomended by fellows members at V8Buick.com that have purchased from you in the past. Perhaps, you know of V8Buick.com. A website of over 28,000 Buick enthusiasts. There are V8Buick.com members, that are interested in similar products; and, have asked for me to keep them updated on my car. Here is a link to that V8Buick.com thread;




    Please, do not hesitate to contact me with any question or comment on this matter.
    Very Sincerely Yours,
    James "Bulldog" Miller
    XXXXXXXXXXXXXXX
    xXXXXXXXXXXXXXX
     
  20. bhambulldog

    bhambulldog 1955 76-RoadmasterRiviera

    I got this Email at 8:07amCentral;
    Good morning Mr. Miller,

    We are very sorry to hear that there appears to be a problem with installing the exhaust system. This is never our intent and while the system is a direct fit once in a while we run into an issue. Jon has read your email and reviewed the photos and has some thoughts on what the problem might be. He will be calling you as soon as possible. Please bear with us as we try to help solve this problem.

    Kindest regards,
    Ruth

    And then an hour later; a phone call from; Jon at Waldron's. We had avery nice conversation. He said they have never had such a problem with this system before. Jon offered some solutions that I passed on to the installer. Jon assured me that; Waldron's will be helpful in resolving any issue.
     

Share This Page