Your intake is a 1973-74 455 so your solenoid (Idle Control Solenoid) needs to be for a '73-'74. Although the 71-72 changed to the 73-74 in the late 70s. #1997424 with bracket. or #1114452. 350-455 are the same. The 3 port switch should be either 3029763 or a 1238524. The 2nd pic of the black plastic one Todd shows is correct. All part numbers have superceded to that one in the aftermarket world.
If you did not find them,I have a set of original valve cover bolts. I have them for the 70-73 and for later engines .I have different #'s solenoids,the same as the one pictured with the dirty intake. Bruno.
Sure can use them, What can I do Bruno to get those sent to me ? The bolts and solenoid? Can you throw them in a Flat rate padded envelope at the Post Office near you?
Hey guys, I’m down to a few minor things! If you have any of these let me know. 1. Alternator brackets, AC or Non-AC doesn’t matter 2 harmonic balancer and pulley, it’s ok if balancer is junk just need it to look undamaged. Here’s where I stand at this point……
Hi Brent,if you still need the balancer,I have a few of them.Just pay a few $ over shipping and I'll ship one to you.Bruno.
Thanks very much, I think Brian Trick is going to take care of me but if not I’ll take you up on the generous offer Bruno! Thanks again for the V cover bolts!