Seatbelt holders

Hi,

Does anyone here have a set of the seatbelt holders? I believe that they were a dealer installed item, not from the factory. They are black plastic and mounted at the bottom of the seat so the male buckle could clip in and keep the belts from flopping around.

 

Chris,
They were factory installed, not dealer installed.
Duane

 

>>Thanks for letting me know Duane - I learn something new every day!

 

I "think" I have some....have to look for them.

EMail me direct at GStage1@buickperformance.com

Thanks!

 

>>Will do - thanks George.

 

I just pulled two from a front seat of a car. One has two slots, the other has one.

I have some for a rear seat also.

 

Hi Mark,

George said he was going to look but if he doesn't have them I would definitely buy from you - how much do you want for them?

 

I'm interested in these belt holders as well. After Chris gets what he needs I'd be interested in a set for front and rear if they will work in a GSX. I hate the belts sliding around and banging on things when not in use.

Thanks!

 

I only have one double ....the singles are not here.

Here is a pic.

 

Hi George and Mark,
I finally got in touch with the guy selling the repro convertible shoulder belts and his kit actually comes with the correct clips so I will not need the shoulder belt holders. Rob you are up next.

 

George where do the double's mount? o No:

 

>>Hi Lee,
When I mounted my set in my '71, I put the double near the single mounting both to the bottom of the rear seat. If you look at your rear belts, two male buckles are very close to each other and one is further apart. Just line them up where the male buckles would reach down and clip into the seatbelt holders.

 

I would be interested in a double and single for the rear seat if anyone has them. Thanks, John

 

I was not aware of this option
I would like a set of them if anyone else has some
Please put me in line for them
Thanks dave

 

Rob Sarlan,
If you want the double set, let me know.

I am going to the yards this morning, will see what other models had them.

 

Mark,

If the holders are not spoken for I'd be interested in a set of front and back. How much? Also, do you still have that jack? Been pretty busy and forgot about it.

Thanks,
Brandon

 

Chris,

Who sells the shoulder belt kit? Is it for the front or back seat?

Thanks,

 

Anybody have the clips that hold the seatbelt to the top of a ~76 bucket seat? they have a split circular plastic ring on the clip and snap into a hole in the mount. And does anyone have a good way to clean light colored seatbelts in the car???
Thanks
Robert

 

George,

I'll take the belt clips. Sorry to be absent, fighting the flu. Hope none of you get it. It is bad this year.

George, PM or email me and I'll send you payment. I'm hoping for a complete set for the front and rear belts.

Thanks!

Rob

 

Rob,
I have never seen those clips on a 70 GSX. (71's yes 70's no) Would you be using these on another car?
Duane