1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice
New users Registered with a gmail address Attention All new Users 67-68 Deluxe Steering wheel recast Group buy

1969 Skylark custom 2dr ht for parts

Discussion in 'Parts for sale' started by cole, Feb 28, 2010.

Page 1 of 4
  1. cole

    cole Platinum Level Contributor

    Starting to part this guy out.Afew parts I've taken off.rear markers $15,rear window corners(egg shells) $12,long arm rest backing plates with mounting tabs driver quality $10,rear ash trays,distributor is 69 350 4 bbl code $10,rear back up lite housing is broken around the light mounts but good lense and brackets $15,pre heat tube is nice not bent shape $15, 2lh 1 rh nice driver quality $10,radio bezel nice and straight $20.rear speaker with hardware and wiring(was cut) $10,front bumper rubbers $10.Lots of other trim ,under hood and interior ,please post with wants and I will get back to you with pictures and prices.These are all plus shipping,most small stuff should be about $7.50 to $12...........Cole
     
    cole, Feb 28, 2010
    #1
  2. Maintool-GS

    Maintool-GS Well-Known Member

    How about, that dashpad....How much $$$ & condition ?
     
    Maintool-GS, Feb 28, 2010
    #2
  3. painekiller

    painekiller Well-Known Member

    how much shipped to 44077 for the rear markers.
     
    painekiller, Feb 28, 2010
    #3
  4. James P

    James P Founders Club Member

    I'll take the rear speaker setup.
     
    James P, Feb 28, 2010
    #4
  5. 1969buickmatt

    1969buickmatt Well-Known Member

    what's your price shipped to 48362 of the front passanger inner fender if it is solid.
     
    1969buickmatt, Feb 28, 2010
    #5
  6. 1100kaw

    1100kaw Well-Known Member

    2 things
    how a bout the grille? just need the plastic part,bottom of grille that fills the gap between bumper. I want to make custom grille and need this peice to finish off bottom. dont care if the rest of grille is broken.
    And , wiper arm transmission, and arms, hidden style.
    Thanks Darrell
     
    1100kaw, Feb 28, 2010
    #6
  7. cole

    cole Platinum Level Contributor

    Hi Jeff
    The non air dash pad is in nice shape.It would be $100 + shipping...........Cole
     
    cole, Mar 1, 2010
    #7
  8. cole

    cole Platinum Level Contributor

    Sorry inner is rusty like they all seem to be........Cole
     
    cole, Mar 1, 2010
    #8
  9. cole

    cole Platinum Level Contributor

    Hi Doug
    How are you?Shipping would be $8 for a total of $23.I also have another set that are in need of attention 1 housing is cracked,the other has a melt spot at the light socket,good surrounds ans "Custom" scripts.$10 for those.If you wanted all 4 shipping would be $12 for a total of $37
     
    cole, Mar 1, 2010
    #9
  10. cole

    cole Platinum Level Contributor

    Hi Darrell
    Here is a picture of the only piece of grill left.It does have the complete hidden wiper assembly intact.What pieces exactly were you wanting?........Cole
     
    cole, Mar 1, 2010
    #10
  11. cole

    cole Platinum Level Contributor

    Hi Jim
    I think I remember now that you'de asked me about a rear speaker:Dou: To you it would be $15 including shipping..........Cole
     
    cole, Mar 1, 2010
    #11
  12. James P

    James P Founders Club Member

    Thanks Cole. Payment will go out tomorrow.
     
    James P, Mar 1, 2010
    #12
  13. Maintool-GS

    Maintool-GS Well-Known Member


    From the picture & of the dash, kinda looks like a small crack & on the far driver side ??? Looking by the pillar post & behind the wire, that is hanging there & by the VIN # plate ! Would this have, sail panel lights Or center dome light ? Would this have, the bottom lip trunk trim ?

    :TU: , Jeff
     
    Maintool-GS, Mar 1, 2010
    #13
  14. painekiller

    painekiller Well-Known Member

    Cole all is good here, hope its the same there. i will take the ones for $23. let me know how you want $$. :TU:
     
    painekiller, Mar 1, 2010
    #14
  15. cole

    cole Platinum Level Contributor

    Hey Jeff
    here are more shots of the dash. dusty as hell but No cracks.The car has sail panel lights and here is the trunk trim.Its got a small crack,flat spot, looks OK as a driver trim not very pitted and all attaching studs are intact,I should have the quarter extention trim as well...........Cole
     
    cole, Mar 2, 2010
    #15
  16. ubushaus

    ubushaus Gold Level Contributor

    Hey Cole,

    Will you be selling that carb? I am guessing it's a 7029244. Also, if you ever decide to part out the motor, I may be interested in the pistons if they are original hi-comp, and in good shape.

    Best Wishes,
     
    ubushaus, Mar 2, 2010
    #16
  17. 455nglide

    455nglide Working On A Dream

    Hey Cole,

    Will you be selling that carb? I am guessing it's a 7029244. Also, if you ever decide to part out the motor, I may be interested in the pistons if they are original hi-comp, and in good shape.

    Best Wishes,
    <!-- / message --><!-- sig -->__________________
    Joe M.

    Joe.M;

    I regret to inform you that I have dibbs on the intake & carb already...it is pending,should the sale fall through you are next in line.

    Best Regards,

    455nGLIDE
     
    455nglide, Mar 2, 2010
    #17
  18. ubushaus

    ubushaus Gold Level Contributor

    Hey 455nglide,

    I don't see where that arrangement is mentioned in this thread - until your post which comes after mine. The parts appear in the pictures along with the "please post wants" in post #1. It's a board rules thing, but I suppose we'll have to see what Cole says about prior arrangements.

    Best Wishes,


     
    ubushaus, Mar 2, 2010
    #18
  19. 455nglide

    455nglide Working On A Dream

    Hey 455nglide,

    I don't see where that arrangement is mentioned in this thread - until your post which comes after mine. The parts appear in the pictures along with the "please post wants" in post #1. It's a board rules thing, but I suppose we'll have to see what Cole says about prior arrangements.

    Best Wishes,


    Quote:
    <TABLE cellSpacing=0 cellPadding=6 width="100%" border=0><TBODY><TR><TD class=alt2 style="BORDER-RIGHT: 1px inset; BORDER-TOP: 1px inset; BORDER-LEFT: 1px inset; BORDER-BOTTOM: 1px inset">Originally Posted by 455nglide [​IMG]
    Hey Cole,

    Will you be selling that carb? I am guessing it's a 7029244. Also, if you ever decide to part out the motor, I may be interested in the pistons if they are original hi-comp, and in good shape.

    Best Wishes,
    <!-- / message --><!-- sig -->__________________
    Joe M.

    Joe.M;

    I regret to inform you that I have dibbs on the intake & carb already...it is pending,should the sale fall through you are next in line.

    Best Regards,

    455nGLIDE


    </TD></TR></TBODY></TABLE>

    <!-- / message --><!-- sig -->__________________
    Joe M.

    Joe M.,

    I apologize for that...sent Cole a PM last night and neglected to post anything, my bad and no excuses offered. As a gentleman and boardmember respectfull of my peers here I too offer up the decision to Cole... I did not mean to make waves.

    Best Regards,

    455nGLIDE
     
    455nglide, Mar 2, 2010
    #19
  20. painekiller

    painekiller Well-Known Member

    Cole i will paypal you the $$ for the markers:TU:
     
    painekiller, Mar 3, 2010
    #20
Page 1 of 4

Share This Page