1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Body Part Survey- 70-72 GS/Skylark- who needs what?

Discussion in 'Repro Parts' started by Jim Weise, Dec 4, 2004.

?

What parts would you buy in the next 12 months?

  1. Outer Wheelhouse, LH, HT $129.00

    16.6%
  2. Outer Wheelhouse, RH, HT $129.00

    17.4%
  3. Outer Wheelhouse, LH, Convert $199.00

    11.2%
  4. Outer Wheelhouse, RH, Convert $199.00

    10.6%
  5. Factory Style Quarter Panel HT- LH $600

    20.4%
  6. Factory Style Quarter Panel HT- RH $600

    21.3%
  7. Factory Style Quarter Panel Convert LH $800

    12.8%
  8. Factory Style Quarter Panel Convert RH $800

    12.6%
  9. Core Support- All - $259.00

    38.4%
  10. Deck Filler panel- HT- $159

    14.1%
  11. Deck Filler Panel- Convert- $199

    3.2%
  12. Front Fender- All- LH $359

    31.9%
  13. Front Fender- All RH $359

    34.9%
  14. Wheel opening molding (all 4) HT/Convert $259

    21.2%
  15. Inner front fender LH all - $279

    13.3%
  16. Inner front fender RH all - $279

    28.4%
  17. Door skin LH - $199

    15.2%
  18. Door skin RH- 199

    14.5%
  19. Drip Rail moulding set- HT- $199

    9.0%
  20. Rear Bumper- 70 $299

    20.1%
  21. Rear Bumper 71/2 $299

    11.8%
  22. Rear Bumper 71-2 with N25 option $359

    17.9%
  23. Front Bumper- 70 $299

    18.6%
  24. Front Bumper- 71 $299

    11.1%
  25. Front Bumper- 72 (less rubber kit) $299

    9.5%
  26. Trunk Drops

    8.5%
  27. future

    3.0%
  28. future

    0.5%
  29. future

    0.5%
  30. future

    1.1%
Multiple votes are allowed.
  1. Jim Weise

    Jim Weise EFI/DIS 482

    George..

    I have no ongoing project to be reproducing body panels myself.. this poll was simply put up to see who would be interested in buying what.. for those companies who do wish to repop stuff.. this is all I can do to help them out.

    Here is a cut and paste of my first post in this thread.

    Sorry if anyone thought I was doing parts.. Just gauging interest for those who are..


    -----------------------------------

    Recently, there has been a few threads concerning getting body parts repro'ed.

    One vendors answer has been that they don't see a market. A few years ago, when the supply of good parts cars and NOS parts was greater, I believe they were correct. But now, with a lot of those cars and parts gone, and with the changing demographics of the owners of a lot of these cars, I think the need may be there now.

    Let's find out.

    The poll is a list of Body parts for the most common cars. I know you pre-70 guys would like some parts too, but I think we have to start with the most popular body style, the 70-72.

    I went to Goodmark's site, and grabbed some sample prices for Chev, Pont and Olds parts.. .

    In some cases, I raised the prices, due to what I percieve as less demand than the example I looked at..

    This is not about getting a bargin folks.. it's about getting them to make a part, that they can do, make money, and make us more parts...

    The poll lists a part, a possible retail price based on other the prices for the same part for other brands, that they offer.

    If you would purchase one of these parts, for the suggested retail price listed, then vote for that part. These are all 70-72 body parts.

    You can vote as for as many items as you need. But don't just click them all, for the sake of "fattening up the poll" because if we get them to make a part, and nobody buys it, they will be much less likely to make something else for us. We need a reasonably accurate survey here.

    We will give this some time to develop, and then forward the results to a number of manufacturers. And then maybe we can get something done.

    The order that they appear in the poll, is what I consider the priority for need parts.. when's the last time you saw an NOS, or even good used, outer wheelhouse for sale?? And lots of guys need them..

    Quarters and wheelhouses are almost automatic in this shop.. I have a few cars right now that could use wheelhouses.

    This poll is open for 30 days, you can vote for as many parts as you will need.

    Also note that to add validity to this poll, the vote is public.. what you voted for, and your username, will appear. (Although a glitch in the software will not allow you to see the names, after you vote)
    __________________

    Qwner/operator
    Tri-Shield Performance
    Jim Weise
    Founder/Owner
    V-8 Buick.com
    www.trishieldperf.com
    763-422-8685
     
  2. 1971SkylarkConv

    1971SkylarkConv New Member

    Any hints on chrome trim for a 71 convertible? I need the side body molding and i seems like searching for peace in the middle East.
     
  3. flynbuick

    flynbuick Guest

    Do you mean the strip designed to deter door dings?
     
  4. RICKYC53

    RICKYC53 Active Member

    i dont see it on the list ... but i definely would be in for a repro steel GS hood ... cant bring myself to buy a glass one...
    Rick
    IL
     
  5. Rustyoldbuick

    Rustyoldbuick 4G37V2H Buick Nut !!!!!!

    I DONT WANT A GLASS ONE EITHER!!!!!!!:TU:
     
  6. britt'sStage 1

    britt'sStage 1 A Lone Wolf In D.C.

    I've noticed that when it comes to GRILLES,it would seem that very few members respond about the 1972 Grille compared to say a 1970 or a 1971...but when I take a look,that they're more than a few of us '72 owners...unless we get our plug in on a reproduction '72 GS Grille,trying to find a good-to-decent grille will be harder to find than TICKETS to the SUPER BOWL,an hour before kickoff...just a thought.Jay B.Britt,Jr.
     
  7. flynbuick

    flynbuick Guest



    Your best chance is to approach either Buick Frank on here or Joe at the Parts Place with pre-orders backed up by dollars in hand. They may tell you how many pre-orders backed up by deposits they require before they will commit to this project. Many will say they will buy one but many will never follow through. I suspect you are talking in the range of 600 bucks a piece. Make sure to get these pre-painted with studs.
     
  8. idahoskylark

    idahoskylark idahoskylark

    i agree a 72 grille would be nice
    i don't even know how mine stays on the car it getting so bad
     
  9. TimR

    TimR Nutcase at large

    Hood hinges would be a good one to add to the list as well. I think most everyone needs a set...
     
  10. moleary

    moleary GOD Bless America

    70 non ac heater control cables?
     
  11. racngrn

    racngrn Well-Known Member

    Repro steel hood would be awesome. Door skins are always good as are front fenders. Hood would be a big hit across the three years, I would think. Steve
     
  12. staged70

    staged70 RIP

    Thanks to Mark Reeves of Then and Now Automotive quarters, core supports, tulip panels, and Pass inner front fender are available or soon will be. Thabns to thepartsplace rear hardtop and convert inners are available along with 67, 70 and 71 grilles N 25 tips, and other parts we have needed for a long time. Lets spend some money and start supporting these guys. If I had a rusty GS I would be ordering right now. Due to my spending 10k I no longer have rust issues in my Suncoupe project. Trunk Drops are available thru Sherman associates. I am sure someone else can add more to this list. Lets keep the parts trains moving.
     
  13. scrisp

    scrisp WiP - Work in Progress

    Hi All, I haven't been on the board much lately, just so busy with other things. But, I did have a little birdy tell me that Then and Now was getting ready to make some core supports, so I gave them a call.

    The guy who answered was really nice and was willing to listen to me tell about my car and how I found the original owners through this forum. :)

    He said that the core supports should be ready in 30-60 days and the price should be around $500 give or take a bit.

    Now I can't wait to get my hands on one of these pieces and get back to work on my car, as soon as it gets warmer. :TU:
     
  14. mainebuick

    mainebuick Well-Known Member

    how many 70-72 skylark/gs repro headlight bezels would sell?
     
  15. scrisp

    scrisp WiP - Work in Progress

    2 for me, but depends on the price/quality. Mine aren't real bad, but would still like some new if they were made.
     
  16. TroyGS

    TroyGS Well-Known Member

    I need me a Pair of these Interior Light Covers... Very hard item to find. Help me if you can! Thanks!

    IMG_1799.jpg
     
  17. N360LL

    N360LL milehi71Stage1

    I'm actually trying to find a source for 1970-1972 spindles for a car with factory disc brakes. I have had a very difficult time locating a source for them; new or used. Thoughts?
     
  18. TimR

    TimR Nutcase at large

  19. kingdaddycreel

    kingdaddycreel Well-Known Member

    A 1972 grill would be a nice part to reproduce.
     
  20. staged70

    staged70 RIP

    Door shells not skins as the Buick GS 70 to 72 ins more apt to have rust inside the shell than the skin. If thats all thats available then yeah skins . By chance is a chevelle frame the same on a door?
     

Share This Page