General suggestions about paint

scott kerns · May 9, 2011

Golden Oldie 65 said: ↑

Here's a `68 GTO I just painted a couple weeks ago, and the procedure: Obviously, get the bodywork as straight as you can. 3 coats of Nason 421-19 urethane primer, block sand dry with 180, 3 more coats of primer, block sand with 400 wet. I used Dupont Chroma One single stage urethane on this one because it isn't metallic. 4 coats of paint(no clear), block sand with 1000 grit, then again with 1500 and again with 2000 and buff. It's a lot of work and time consuming but the amount of time you are willing to spend on it depends on how nice you want the finished product to look.
Click to expand...

Bill I want to take classes from you! :beer Man that paint looks nice!

Scott

Log in or Sign up

General suggestions about paint

scott kerns Silver Level contributor

Share This Page