John Osborne rebuilt #7042240, Q-Jet and Other Parts For Sale.

I Have some 455 parts I would like to sell. They are:


John Osborne prepared Q-Jet # 7042240
This is a John osborne prepared 1972 800 cfm Q-jet. It is absolutely perfect. Only used for one Summer. Date code MB 1302. Have some extra hangers and metering rods. Has correct GM#7038237 vacuum break. $350 shipped to the lower 48. SOLD


Brand new A/C Delco custom fit set 7mm spark plug wires, Delco #508K/ GM #12043780, for 1970 Buick 455. $20 shipped to the lower 48. SOLD

Heavy Duty thermal fan clutch lightly used. Napa #271301 used for 4 months, like new. $25 shipped to the lower 48. SOLD

New distributor cap. Very heavy thick plastic cap with copper terminals and brass coil tower insert. This is an older "Standard" branded cap #DR-429, when their stuff was still good. $15 shipped to the lower 48. SOLD

Q-Jet Carb Gaskets. Fel Pro #60151 and a rebuilders gasket. $10 for both, shipped to the lower 48. SOLD

3/8 Stage 1 repro hardline fuel line, from pump to carb. This is a Stage 1 repop, that has been shortened to come up to about the head/intake height. It leaves room for an aftermarket fuel filter and a regulator, before the carb. Correctly flared and nutted on both ends. $12 shipped to the lower 48. SOLD

455 Stage 1 chrome repro wing nut. $6 shipped to the lower 48. SOLD

9/16 and 1/2 dual ended 2 piece distributor wrench. Can be used at many angles. $8 shipped to the lower 48. SOLD

Victor branded stock 455 valvecover gaskets, cork. $10 shipped to the lower 48. SOLD

Normark 50lb fish weighing scale. (Sorry for the non Buick item.) $15 shipped to the lower 48. Sale Pending

T/A dipstick tube and tack weldable bracket. $10 shipped to the lower 48. SOLD

455 Stage 1 repro chrome valve cover hold down hardware, nice. (However, missing the load spreaders, for the top bolts.) $8 shipped to the lower 48. SOLD


Thanks for looking.

John

 

PM sent on distributor cap

 

Here is the carb.

 

Here is some of the other parts.

 

interested in cap and plug wires pending pictures pm sent Tony

 

Some more pics

 

I will take cap and wires if not sold. Tony

 

PM back at ya.

John

 

John,....i'll take the wing nut and the distributor wrench.....paypal ok??..pm me address thanks

 

I'll take the fuel line and the q-jet gaskets. pm coming

 

I will take the plug wires and distributor wrench if not previously been spoken for..... Let me know how to pay.

Lon

 

I'm probably too late, but I'll take the wires if something happens.

 

John.....check going out tomorrow......plesae add the valve cover gaskets. pm sent chris

 

Done, thank you.

John

 

john, i'll take the fan clutch. personal check o.k.? thanks

 

Yes check is prefered. Thank you. PM sent.

John:TU:

 

John, I'll take the dipstick tube if you want to bring to Cordova.

 

Thanks Dennis. I'll bring it. Looks like the car is going, but it has a horrible stumble now, when you matt it off the idle. Got some smart people trying to help me, but the HP 1000 might be a tad too big, now that this new converter loads the engine different??? Never had the issue on the more overall looser converter.

Might lose the 60 ft., but should pick up on the other end. We will get it all together eventually, but at Cordova, we might have troubles on the get-go.

John:TU:

 

I told Paul if his helper couldnt get it dialed in to let me know. I have a good friend that can help if needed. He's a Mopar guy, but he works magic on carbs.:Brow: He's a closet Buick guy... But we wont tell his friends:laugh:

 

Isn't everyone...:TU: