Misc 64-65 Skylark or Special Parts- shorty console etc

Misc 64-65 Skylark or Special Parts.

I'm going to be listing some items on Ebay this weekend. I figured I would see if anyone on here has any interest. Needless to say I'm not giving the stuff away. I will have more to list as I look through the garage some more. I won't be able to get pictures until this weekend. Thats when they will hit ebay + more parts. I'm unloading more parts. I can't take all of these extra parts being around here anymore. NO PMS to get in line. Please post your interest here first.

1964 Special or Skylark front bumper- Driver or core $175

NOS 64-65 Reverse lights- $350 sold

64-65 Set of Wheel opening moldings light dings and scratches- $350 SOLD ON EBAY

Red seat belts not retractable- Misc- $35- gone

Green Seat belts with Buick Emblem on Buckle- $40 -sold

1964- 4 door or Special wagon interior door trim panels- $40 set of 4- threw away

1965 Sport wagon interior door emblems-$20 for a pair- sold

1965 Special straight front bumper core $75-sold

1965 Sport wagon doors-shells only-$25 each- scrapped

1965 Sport wagon used quarter panels-$250 each RT SIDE/ SOLD

1965 Skylark dash pad-does have some cracks repairable-$95- sold

1965 Sportwagon tail light housings- nice shape $50- sold

64-65 lt side coupe door dented-crease but solid-$100- gave away

1964 Skylark grille emblem nice driver-$65 sold

1965 used 300 original 300 pistons and main caps-$25 set- scrapped

Window regulators-misc-$15 each

1964 Skylark 2 door quarter moldings-dinged no spears-$15- sold


1964 Skylark dash vinyl padded surround no cracks-$150- sold

Misc vent windows $25 each

Deluxe Arm rest backing plates- 2 painted rough $15- sold

Deluxe single Arm backing plate-peeling chrome 1 crack-$12 - sold

300 CI engine a/c alternator front bracket-$15SOLD

300 CI aluminum a/c bracket- $15SOLD

300 ci a/c compressor back bracket $20SOLD

1965 front bumper brackets- $20 set

1964-1965 Skylark rear bumper brackets-$20 set

1965 Skylark red bird emblems-interior door emblems- driver quality $30 set of 2- sold

Sport wagon or 4 door Skylark rear door arm rest with ash trays-no tears or splits $30 set.

Misc 1964 Skylark remote mirrrors-$20 Each

1964 Special left fender no rott- $100- sold

300 CI valve covers-$30 set

1964 Skylark or Special-Dash Radio panel-$80

65 Sport wagon tailgate $25- scrapped

1964 Special fenders- $75 Each side patched prior- sold

1965 Skylark Halo moldings set $150

1964 Skylark rear tailpanel wide moldings light pitting-$40- sold

1964 Skylark or Special-Stainless rear body panel moldings- $35

1964-65 a-body left front wheel house-no rott-$50

64-65 a-body Misc battery trays and brackets- $45 each I should have a couple

65 Sport wagon floor extensions and floor cubby hole cover-$5-$30- scrapped

64-65 Sport wagon inner side window trim-$70 set ( 4 pieces narrow metal)- sold



Prices do not include shipping.

Parts are in zip code 60586

Thanks,

Brian

 

Interested in one of the 64 fenders if by "left" you mean driver's side, depending on the pics when you get them.

 

Matt,

I'll get a pic on Saturday for you on the driverside fender. I also have that rear decklid panel in reach now. I'm going to sand blast the lower edge by the rear window to make sure there is no real soft spots. I still have that dome light lense for you. PM me your address and I'll get that sent to you.

Thanks,

Brian

 

What is the condition of the 65 wagon passenger side quarter panel? Any idea of shipping to California, 95453?

 

Kurt,

As far as I remember there was not rott and in good shape. It was cut at the 2nd down body line so most of the qter is there and all the way to the dog leg. I figured this would be the last item someone would ask about. I will get a pic asap of it. I wasn't prepared I guess. I have to get it down from the rafters. Please be patient. Thanks.

 

Ttt

 

here are some pics........

TTT

KCOMBS here are the pics of the rt side quarter panel. No rott some surface rust. This one actually came from the west coast. I can't remember if you have Greyhound close by or not. We may have spoke about that for shipping. Let me know. Thanks.





Matt here are some pics of the fender. The red fender has some signs of bondo where I gound down. There was a small crease. There were some holes drilled I can wel them up. Lower is solid.

Also the rear package tray has some soft spots. I was poking at it and small pin holes are there. The inner part is real solid along with the weatherstrip channel. I'm not sure if you would actually want it or not. I'm sure I can rope those items together and ship as onne with some carboard around it. I'm thinking $85-$100 for the shipping cost due to size.

The blue fenders were on my 64 Special tne rt has a rust spot starting. The other I ground down and there is a patch. I'm assuming the other side is the same. No signs of dent repair on either one of those. Both inner braces have a small hole see pics. Not bad though for an Illinois car.

 

Hi Brian,

Thanks for the picks. I will pm you about shipping.

Kurt

 

Brian - Thanks for the pics. It looks like the red fender is solid at the bottom with a previously repaired crease at the body line; and the blue one has bondo at the bottom, correct? I'm leaning towards the red one but want to be sure it's not too thin at the crease.

 

The red one is solid. The metal doesn't look to be thin where it was creased. I can weld up the holes if you want.

It's up to you. Let me know. I can also cut the bottom of the fender off and the brace and ship just that to you if you want.

Brian

 

Got a picture of the Sport Wagon tailgate? Shipping cost to 45654? I know you don't have one on your list but got any idea where I might come up with a straight,driver quality rear bumper for a 65 wagon? Thanks

 

brian you have any pictures of the 300 brackets.

 

Buxckeye,

I'll get some pics up tomorrow of the tailgate.

Dan- I'll take some pics of the brackets.

Thanks,

Brian

 

Pics of brackets. The green and black colored ones have been sand blasted and self etched primed. Need some black paint applied. The alluminum bracket I never cleaned up. The dirt if free and from New Mexico. It looks in good shape.

Thanks,

brian

 

Tailgate- Pics

 

Buckeye- Shipping would be most likely $85 greyhound due to size. Let me know if your interested.

Brian

 

Brian,

The A/C delete plates went out today via UPS. Let me know about the shipping on the quarter panel.

Kurt

 

Kurt,

I sure will. I was trying to finish getting it boxed up. I'll have the shipping price from UPS on Saturday. I'm taking it down there for a quote.

Brian

 

Hi Brian,

I have a feeling the shipping is going to be a little spendy. Not much we can do about it. I believe UPS has a freight option which might help a little. Whatever it is, I will just have to pay it.

Thanks for all the work getting the panel ready, Kurt

 

Kurt,

Sent the pm as we discussed VIA phone. FED EX looks the way to go!!

Thanks,

brian