1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

New Stage 3 - 4 roller rockers

Discussion in 'Race 400/430/455' started by Briz, Jun 28, 2024.

  1. Briz

    Briz Founders Club Member

    Couple more steps and they go to anodizing

    KIMG2045[1].JPG
     
  2. BrianTrick

    BrianTrick Brian Trick

    Some of Peyton’s work for something non-Chevy. IMG_4011.jpeg
     
    patwhac, Dadrider, PGSS and 5 others like this.
  3. bignastyGS

    bignastyGS Maggot pilot

    That's some skills there Brian....
     
    PGSS likes this.
  4. Briz

    Briz Founders Club Member

    My stuff is now off to get anodized. Red of course! Once back, assemble the bearings and adjusters then onto the shafts, and then put the heads back together. Its so stupid hot down here I'm in no hurry to go to the track.
     
    patwhac, Tuna and dan zepnick like this.
  5. Billy

    Billy Well-Known Member

    I called TA today to order some roller rocker shafts, was told out of stock & on back order.
    So I will have to get some made locally & not play into the TA waiting game.
     
    Todd69GS and Stage 2 iron like this.
  6. VET

    VET Navy Vet, Founders Club

    I wonder why TA can't manufacture their products in a timely manner?
    What's the cause?
    Hard to find good skilled labor
    (Machinists)?
     
  7. Billy

    Billy Well-Known Member

    Even if you kiss the ring, they still do not have a straight answer on availability.
     
    Rob Ross and Todd69GS like this.
  8. BrianTrick

    BrianTrick Brian Trick

    It’s not just Buick parts.
     
    1973gs and alvareracing like this.
  9. TA Perf

    TA Perf Member

    Folks,
    I did not know we were out of Stage 1, Stage 2 Competition shafts. Very sorry. I just ordered them. I'm guessing next week. Hope this helps.
     
    mbryson, PGSS, FLGS400 and 1 other person like this.
  10. Briz

    Briz Founders Club Member

    My new set just got back from Anodizing Hope to have it assembled and the engine back together soon

    download (1).jpg
     
  11. CJay

    CJay Supercar owner Staff Member

    Let's try and stay on topic here.
     
    Todd69GS and 436'd Skylark like this.
  12. VET

    VET Navy Vet, Founders Club

    What's the topic? I got lost with all the posts on here.

    I thought it was the first post > Have a need for a pair of these and they are no longer available. Have a local shop making me a
    full set + a few extra.
    The stock is drop from Scorpion so its the same material used at their factory.
     
    Briz likes this.
  13. TA Perf

    TA Perf Member

    The TA Competition rocker shafts were shipped to us last week. We should have them in stock for Billy in a day or two.
     
    VET and mbryson like this.
  14. Billy

    Billy Well-Known Member

    Thanks, I will call you in a couple of days.
     
    VET likes this.
  15. TA Perf

    TA Perf Member

    Billy, rocker shafts arrived today for our Stage 1 and 2 roller rockers. Very sorry for any inconvenience

    Your business is very important to us.
     
    FLGS400 likes this.
  16. Billy

    Billy Well-Known Member

    Thanks Mike,
    I just ordered them.
     
  17. Thumper (aka greatscat)

    Thumper (aka greatscat) Well-Known Member

    Good job Mike.
     
    Dadrider likes this.
  18. Briz

    Briz Founders Club Member

    Update. Rockers are done with the exception of the roller bearings. Seems no one has them or knows when they will be back in stock. Called T&D where the TA stuff is made and they dont have any either. T&D 's saying they are now using bronze bushings inplace of the bearings. So looks like we'll have to order some bronze and make some. Just another delay.
     
  19. Briz

    Briz Founders Club Member

    I could but was hoping to keep them intact in case another member needed a replacement. We turned a piece of bronze down and made a couple to test fit. Think it will work


    upload_2024-9-11_14-20-49.jpeg
     
    Regalproject213 likes this.
  20. TA Perf

    TA Perf Member

    I will look Monday. Thought our inventory said we had 50 bearings in stock
     

Share This Page