S/P400 & PAE 1800/4000 stall converter for sale

Discussion in 'Parts for sale' started by RAMKAT2, Mar 24, 2009.

  1. RAMKAT2

    RAMKAT2 Randy

    Like the title of the ad says, it is a 12" PAE Switch/Pitch converter with an 1800 rpm low stall steed, and a 4000 rpm high stall speed. At least that is what I was told by the board member that sold it to me. I have never used it, so I have no idea where the flash rpm is. Even the listed stall speed will vary depending on the torque & horsepower level of the motor being used in front of it, and the temperature of the transmission fluid.
    I do know it looks nearly new on the outside, and it worked fine according to the previous owner, it was just too much stall speed for his particular application (big car, mild motor). Thanks for asking, Randy
     
  2. Joe65SkylarkGS

    Joe65SkylarkGS 462 ina 65 Lark / GN

    Shipping to 08879. Let me have a total so I can see where we're at. Thanks Randy.
     
  3. RAMKAT2

    RAMKAT2 Randy

    Joe65SkylarkGS, I have to leave town over the weekend, but I will get you a shipping cost on Monday so I can get you the converter. Thanks, Randy
     
  4. Joe65SkylarkGS

    Joe65SkylarkGS 462 ina 65 Lark / GN


    Have a good weekend. We'll talk next week.:TU:
     
  5. RAMKAT2

    RAMKAT2 Randy

    Joe, parcel post will run about $28, Fedex ground will run about $22. I will need you to PM your complete shipping address to me to complete the deal.
    A money order will do (Western Union is probably the cheapest) for payment.
    I will PM my mailing address to you. Later, Randy
     
  6. Joe65SkylarkGS

    Joe65SkylarkGS 462 ina 65 Lark / GN

    Randy. upon further investigation, I was mistaken and this isn't the converter I need.:mad:

    Thanks anyways.


    Next up!!:Comp:
     
  7. RAMKAT2

    RAMKAT2 Randy

    Thanks for looking Joe. Looks like the 12" PAE converter and the S/P 400 turbo trans are still available. Anyone else interested?
     
  8. stan cortez

    stan cortez Member

  9. RAMKAT2

    RAMKAT2 Randy

    Stan, reply sent.
     
  10. Pro69GS400

    Pro69GS400 Well-Known Member

    If for some reason the deal on the converter falls through I will take it....
     
  11. RAMKAT2

    RAMKAT2 Randy

    Chris, I sent you a PM. The converter is still available.
     
  12. Pro69GS400

    Pro69GS400 Well-Known Member

    :Dou: Sorry Randy found out this wont work with my set-up. I have to pass on it. Sorry again & thanks....Chris
     
  13. RAMKAT2

    RAMKAT2 Randy

    PAE 12" switch pitch converter with 1800/4000 stall speed is still for sale. BT code 1967 switch pitch 400 turbo transmission is also still for sale as a complete unit (it needs to be gone through), although I am discussing disassembling the trans and selling only the parts required for an swich pitch conversion to a standard 400 turbo with a board member at this time.
    Price is $250 for the converter, $200 for the complete transmission, plus whatever freight charges are necessary to get it to your location. Or you can pick them up in Fort Scott, KS 66701. Thanks for looking, Randy
     
  14. 65specialconver

    65specialconver kennedy-bell MIA

    Fine,i will take the converter...pm sent.
    You guys dink around too much!:bla: :laugh:
     
  15. RAMKAT2

    RAMKAT2 Randy

    Thanks Jamie! PM sent with price including shipping.
     
  16. RAMKAT2

    RAMKAT2 Randy

    PAE converter is sold and has been shipped to Jamie. I still have the 67 S/P 400 trans for sale, as well as 3 other (75-76 vintage) long tailshaft turbo 400 transmissions. The price for the rebuildable S/P is $200 plus shipping. The other 3 I will let go for $100 each plus shipping, or you can pick them up in Fort Scott, KS 66701. Come on guys, don't make me sell these on ebay.....
     
  17. RAMKAT2

    RAMKAT2 Randy

    Price reduced to $150 plus shipping on the 67 S/P 400 trans. Price reduced to $75 each plus shipping for the 3 longshaft turbo 400 transmissions. Or pick them up here in Fort Scott, KS.
     
  18. Kingfish

    Kingfish Well-Known Member

    Randy,

    I will buy the SP trans. Shipping to 18847 please.

    Thanks,

    George
     
  19. RAMKAT2

    RAMKAT2 Randy

    George, do you have a commercial address or a residential address? That will affect the shipping price. Let me know, and thanks for purchasing the transmission. Randy
     
  20. Kingfish

    Kingfish Well-Known Member

    Randy,

    PM me a contact number and I will call you. I can use my commercial account at work to arrange the shipping from your end. It would involve you palletizing it and taking to a local connecting common carrier. Obviously, I would compensate you for your help. To get this started PM where and how you want payment.

    Thank you,

    George:TU:
     

Share This Page