Setting the stage :) I have a 68 430 in my 70 vert, engine acquired from a friend decades ago. He stated that the owner of the 68 Electra had...
1969 Riviera GS 430 ci engine ST400 trans Limited Slip Differential GS Package Polar White with Green vinyl top and interior Power/Tilt Steering...
Hi all, i have rebuilt my engine and discovered the heads are cracked beyond reasonable repair. July last year ordered a set of aluminium heads...
Hello, I recently acquired a 1968 GS 400 convertible, and I was told it was original. However, the valve covers say 430-4. Is it possible it...
LOOKING TO SELL AS A PACKAGE DEAL: 70 + 73 BUICK ENGINE BLOCKS & HEADS, 69 COMPLETE 430 MOTOR 83K, RAN WHEN PULLED, NEEDS CLEAN UP, DETAIL, AND...
Looking for a rear end for 1967 Buick Riviera. Mine came with a 3.08 stock. Would consider all complete parts including Posi setup.
Hey guys looking for a 9 3:8 Buick rear end with a 3.08 gear I have a 1967 buick riviera GS. Was going to put a Posi unit in this car but can’t...
Hello Buick Fans, I have my 66 Buick Le-Sabre with a 340. My mechanic and I are having issues keeping the timing where it needs to be to run...
Hi...I just purchased a 69 Electra 225 with 13,000 original miles. She's a gem. The decal on air cleaner shows "455-4". Antique license plates...
[ATTACH] [ATTACH] Getting it torn down and starting to cut out all the frame rot. I'll post up the progress as it comes in.[ATTACH][ATTACH] Got...
Hey all, i am in the renovation process of my Rivi. I want to change the heavy original intake to a lighter aluminum version like edelbrock B4B...
Hi all, i need to replace all Rockers and Shafts in my 68er Riviera 430. Anyone knows a good shop where i can buy a complete kit with everything...
Need one in reasonable shape -- Shipping to 01803 If you send me a PM please be sure to include a picture and a price Paypal or check is fine...
My water pump is fastened with the wrong length bolts. Can anyone tell me the size and length of the bolts needed to fasten the water pump onto a...
Trying to find some affordable headers for my 430 Buick. Ta has some but way too expensive. Any alternative headers I can run that won't hurt the...
Hi ever one I have just done a 430 rebuild and installed a bigger cam. http://www.taperformance.com/proddetail.asp?prod=TA_212-455&cat=153 Now...
Will take a pan without the sump too. Let me know what you have & how much you want. Thanks!
Long story short bought the car sight unseen & motor is shot. Rebuilding is over my budget. Cars been at the shop going on 4 months now & shop...
Hi, I'm taking out my 430 engine and putting in a 350. I'm wondering what flex plate (flywheel) I should use? Can I keep the flywheel from the 350...
Hi guys, I own a 1969 Buick GS 400 with a 430 engine in it. I believe it is a Riviera's, but I'm not sure. The engine was honed some years ago to...
