Not mine: https://seattle.craigslist.org/sno/pts/d/monroe-455-kick-ass-motor/7252089753.html 1972 455 MOTOR FROM BUICK RIVERIA 42H916172 455 HEADS FROM SAME MOTOR 455 EDELBROK PERFORMER ANUMINUM INTAKE BLASTED SUPER CLEAN CLEANED PAINTED ORIGINAL EXHAUST MANIFOLDS EDLEBROCK 650?700? CARB NOT EXACTLY SURE. CHROMED BUT DIRTY TH 400 TRANS AND CONVERTER, FLEXPLATE NO NAME HEADERS WITH ALL GASKETS AND APPLICATION HARDWARE. (USED TO BREAK IN CAM ON ANOTHER 455). THE DRIVE TRAIN ALSO COMES WITH THE MOTOR This was a running motor when I tore it down. I have all the other pieces coil, fuel pump, starter, distributer ect. Most of the bolts have been washed degreased and sorted labeled containers. The block and heads are ready for the machine shop. All the original parts are available and in bins lifters, rods, wire harness. All of the pullies, brackets, valve covers, and oil pan have been blasted and painted. Except the oil pan which is blasted and ready for paint. You WILL have to replace the timing cover I have the old one but its shot. ALSO WITH THE MOTOR COMES: 68 cc. First year to use the large Stage 1 valves. Heads have casting number 1231786. http://www.buickperformanceclub.com/455hds.htm 1968 430 HEADS AND INTAKE HEADS 1231786, INTAKE B1386003E 350 POWERGLIDE TRANSMISSION WITH CONVERTER NEW BILLET DISTRIBUTER IN BOX. IT WAS INSTALLED IN MY 350 BRIEFLY BUT I DIDN’T LIKE THE PERFORMANCE. 24’ FAN SCHROWD NEEDED FOR A 455. ITS BEAT UP BUT WILL WORK THE BLOCK IS ON A STAND THAT COMES WITH THE MOTOR SO YOU CAN JUST ROLL IT ONTO YOUR TRANSPORTING VEHICLE. For those that don’t know. Everything for this motor, High performance or otherwise is available from TA Performance. My plan was to make a deal with them by sending them all 4 heads and the 430 intake for price reduction on new aluminum heads. It would chop 60 lbs, they bolt right on and are high performance adding btwn 25-35 HP. ALL TO GO TO NEW HOME 1,700.00