[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I have a complete intake to oil pan 1975 455 with stock low...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I have a set of fully rebuilt 73 heads...
Ok the day is here. TA has my TE Stage 2 castings and is waiting for me to tell them what I'm going to use in them. I'm going to run race gas with...
I’ve built a few motors before, but this is my first BBB. I picked up a set of 71 standard 455 heads that were supposedly gone through a while...
Hi all, i have rebuilt my engine and discovered the heads are cracked beyond reasonable repair. July last year ordered a set of aluminium heads...
Not mine: https://seattle.craigslist.org/sno/pts/d/monroe-455-kick-ass-motor/7252089753.html [IMG] 1972 455 MOTOR FROM BUICK RIVERIA 42H916172...
Does anybody know of a good engine builder in SE Washington state? Somebody who speaks Buick? Alternately, if I have to go to whatever shop is...
Does anyone have any intake port data both untouched and ported of the cross-sectional area (CSA) or the dimensions of the Port Entry (height,...
I was wondering if any of you guys especially my fellow Canadian members would know of a good reputable shop that specializes in buicks in the...
Hi all. I’m new to the board, but not so new to my '72 GS 350 (bought it in '94). It’s basically stock except for a 2-1/2 manifold-back exhaust...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] 1970 heads that were unmounted Located in Michigan 1400.00 plus shipping I have all the valves except...
My computer crashed over the weekend and while reassembling my data files, I found this one. The table below shows all the airflow numbers I've...
Building a 430 from a '69 Wildcat. The car has been in my family its whole life. I was hoping to use the original heads but the machine shop found...
Wanted 350 Buick Heads. Casting Numbers 145 or 556.Cannot be ported. Contact Mike at (219)608-9118
Disclamer- I know this has been beaten like hell, just bare with me:bglasses: a week or two ago, I had posted about my 350, Well I've had a 455...
Hey everyone! I don't post much but when I do I ask for advice and tips to help me build up my BBB. You guys are very helpful and I deeply...
**Package deal - $500.00** Block - $100.00 Aluminum 4bbl intake - $200.00 Aluminum heads - $200.00 Crank - $50.00 Harmonic balancer - $50.00...
Guys, Need some help. Are the 68 430s an interference engine? Got some help replacing the timing chain and compression is now 60psi in most of...