1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice
New users Registered with a gmail address Attention All new Users 67-68 Deluxe Steering wheel recast Group buy

Interest in Kenne Bell Stage 2 Hood Scoops?

Discussion in 'Products and Services' started by TABuickMike, Jun 2, 2011.

Tags:
?

If TA brought back the Kenne Bell Stage 2 Hood Scoop...

  1. Yes I would buy one in a heart beat!!!

    49 vote(s)
    30.2%

  2. Yes I would buy one, but it depends on the price

    91 vote(s)
    56.2%

  3. Sounds super cool, but I don't want/need one

    22 vote(s)
    13.6%
Page 6 of 8
  1. ceas350

    ceas350 "THE BURNER"

    x2
     
    ceas350, Aug 7, 2013
    #101
  2. dboz

    dboz Well-Known Member

    The lack of an update speaks volumes.
     
    dboz, Aug 7, 2013
    #102
  3. otter

    otter It'll be done someday.

    KB scoop 01.png
    KB scoop 02.png
    KB scoop 03.png
    KB scoop 04.png
    KB scoop 05.png
    KB scoop 06.png
    KB scoop 07.png
    KB scoop 08.png

    This original KB scoop was on eBay not too long ago, couldn't afford it though. :(
     

    Attached Files:

    otter, Aug 10, 2013
    #103
  4. Guy Parquette

    Guy Parquette Platinum Level Contributor

    What did it go for?
     
    Guy Parquette, Aug 10, 2013
    #104
  5. TABuickMike

    TABuickMike Michael Tomaszewski Jr

    I've been trying to work with the fiberglass guy to get him to make the back of the scoop correctly, and a guy I knew was going to take a Skylark hood over to the fiberglass shop and work with them to get the scoops made to fit the hood correctly, but just before he was about to do that he had a lot of family stuff fall on his lap, and he's been dealing with that for the last few months. I'll give him a call this afternoon and see how he's doing and if he can run the hood over.

    Like I mentioned earlier in the thread, this is a project that I try to work on in my spare time (which I dont have much of). If you really want a scoop and don't mind the gap at the back of it, let me know and I'll have one made for you. I'm sorry for how long it's taking for people that really want one.
     
    TABuickMike, Aug 12, 2013
    #105
  6. otter

    otter It'll be done someday.

    If memory serves, I think that one on ebay went over $250 before I stopped looking, I assume someone on this forum bought it. I kick myself now for not buying a few dozen back in the day.
     
    otter, Aug 13, 2013
    #106
  7. 71_skylark

    71_skylark Well-Known Member

    :TU: Oh yeah!
     
    71_skylark, Sep 9, 2013
    #107
  8. SIX T 8

    SIX T 8 Member

    No idea of the quality. Just info to consider.

    http://www.vfnfiberglass.com/site.htm
    [FONT=Verdana, Arial, Helvetica, sans-serif]
    '70-72 Buick Stage II Scoop.Price=110.00 (18"w x 19-1/2"L x 4"h)     Weight=3each Ship: UPS Item.    [/FONT]
    [​IMG]
     
    SIX T 8, Sep 25, 2013
    #108
  9. bostongsx

    bostongsx Platinum Level Contributor

    Vfn makes nice pieces, this looks like the solution to the problem
     
    bostongsx, Oct 3, 2013
    #109
  10. hugger

    hugger Well-Known Member

    I took my vfn and made it look pretty much identical to the factory scoop by using a piece of fuel line glued in the opening to replicate the rolled edge of the factory one
     
    hugger, Oct 22, 2013
    #110
  11. ceas350

    ceas350 "THE BURNER"

    Pics? Please
     
    ceas350, Oct 22, 2013
    #111
  12. Sizzling72

    Sizzling72 Active Member

    I would get one if the price is reasonable, always loved the Stage 2 hood scoop.
     
    Sizzling72, Oct 22, 2013
    #112
  13. hugger

    hugger Well-Known Member

    I'll post a few this evening, I still have to finish fitting the base to hood to close the gaps but I was under the gun to get it on for the nats
     
    hugger, Oct 22, 2013
    #113
  14. hugger

    hugger Well-Known Member

    Last edited: Oct 22, 2013
    hugger, Oct 22, 2013
    #114
  15. hugger

    hugger Well-Known Member

    just ignore the black duct tape it was part of the last min effort to get the hood on and ready for the nationals it will sealed up with seam sealer and dressed up as is the fit to the hood it will be taken off and "fitted" for a much cleaner look, the air tray is a 18 in pizza pan I got for free the mesh is stainless from a fry pan cover with an air bell from quick fuel to make it all work
     
    hugger, Oct 22, 2013
    #115
  16. ceas350

    ceas350 "THE BURNER"

    Now that's hot!
     
    ceas350, Oct 22, 2013
    #116
  17. buickracing

    buickracing Member

    I was just asking bout this scoop i will be willing to buy one asap depend on price, let me know, i have till feb to get it but do want to buy asap.
     
    buickracing, Oct 22, 2013
    #117
  18. Tuna

    Tuna Platinum Level Contributor

    Looks great man!
     
    Tuna, Dec 3, 2013
    #118
  19. bostongsx

    bostongsx Platinum Level Contributor

    Very nice!
     
    bostongsx, Dec 3, 2013
    #119
  20. gsx678

    gsx678 Well-Known Member

    Hey Mike,
    Anything new with this project?
    Thanks,
     
    gsx678, Feb 5, 2014
    #120
Page 6 of 8

Share This Page